Soft Wash Pump Control Box 20AMP

Heavy-Duty IP65 Waterproof Housing
Built for demanding environments, the control box is housed in a durable IP65-rated enclosure to protect the electronics from dust, moisture and water splashes.

Connects Directly to Your Pump & Battery
The controller is wired between your 12V battery and pump, providing reliable power management and convenient remote operation.

Integrated Digital Voltage Display
A built-in voltmeter continuously displays your battery voltage, allowing you to monitor battery condition at a glance and helping prevent unexpected downtime.

Low Voltage Battery Protection
The controller automatically disconnects the pump if battery voltage drops below 11.0V, protecting your battery from excessive discharge. Once the battery has been recharged to 12.0V or above, the controller will automatically allow normal operation to resume. This helps extend battery life and reduce costly battery replacements.

Remote Control Operation
Start and stop your pump from a distance using the included remote control, making it easier to operate your system without returning to the control box.

Manual Override Switch
If the remote is unavailable, damaged or misplaced, simply use the built-in override switch to operate the pump manually.

20 Amp Circuit Breaker Protection
An integrated 20A circuit breaker protects both the controller and pump by automatically disconnecting power in the event of a short circuit or major pump fault. Once the issue has been resolved, normal operation can be restored.

• Softwash systems

• Pressure cleaning trailers

• Chemical transfer pumps

• Agricultural spraying equipment

• Mobile wash rigs

• 12V diaphragm pump systems

1. Turn the POWER switch on.

2. The LED indicator will illuminate.

3. Press the remote button to start the pump.

4. Press the button again to stop the pump.

5. Alternatively, use the manual Override switch to operate the pump directly from the control box.